1.25 GAL KIT WATERBASE EPOXY
A premium quality 2-component water base epoxy concrete sealer/primer that provides epoxy toughness, chemical resistance and durability with the convenience of a water base VOC free system. It is fast cure and easy to use. Zero VOC, clean up with water & soap.
CLEARLIGHT GRAY - $10.00MEDIUM GRAY - $10.00DARK GRAY - $10.00BEIGE - $10.00WHITE - $10.00TAN - $10.00MOCHA - $10.00TILE RED - $30.00SAFETY BLUE - $30.00SAFETY GREEN - $30.00SAFETY YELLOW - $30.00BLACK - $10.00
1.25 GAL KIT
Immediately prior to application, damper surface with a water sprayer. Do not puddle or leave standing water, spray only enough to darken concrete surface. After begin applying the properly mixed epoxy always making sure to keep a damp edge ahead of the application until the floor is complete. For best results on horizontal surfaces, pour the entire mixture evenly onto the surface as soon as possible after mixing. Use a 3/8" nap roller or squeegee to spread mixture over the surface, backrolling the area to be coated. For best results apply at least 2 coats at 300 sq. ft. per gallon. Clean tools with soap and water before curing begins. To increase skid resistance, stir in an approved non-skid additive into your A & B mixture.
Prepare surface by sanding, grinding, dry or wet sandblasting or shot blasting to achieve a clean, porous and uniform exposed aggregate finish with a CSP (Concrete Surface Profile) rating of "2" that will allow the product to penetrate the surface. Bead or shot blasting is the most reliable method of preparation. Clean surface entirely with TSP and rinse completely with water several times.
DATASHEET & SDS
Waterbase Epoxy Datasheet
Waterbase Epoxy SDS - A
Waterbase Epoxy SDS - B
GALLERY & TRAINING VIDEO
Toll-Free: (855) EPOXY2U(855) 376-9928
Call: (714) 477-8700
The world premium floor coating made by Epoxy2U in the USA. We operate a 25,000 square foot manufacturing facility in Fullerton, CA.