3 GAL KIT METALLIC EPOXY
E2U Metallic Epoxy is a three component, high performance modified cycloaliphatic epoxy concrete floor coating system. Its epoxy chemistry provides excellent bonding characteristics. Typically applied at a 24 mil think single coat (50 - 60 SF/gal). This dynamic blend does not require an activator to be sprayed on the surface to obtain a unique and highly decorative look. It was 45 - 60 minutes working time and it has excellent flowability and self-leveling characteristics. It is Zero VOC and modified to be highly ambering resistance.
3 GAL KIT
The uniqueness and universality of E2U Epoxy’s chemistry facilitate the applications where USDA Food & Beverage and other regulatory requirements must be obtained. Areas of use include garage floors, Showrooms, Hotel Lobbies & Entry-Way, Exhibition halls, Restaurants, Retail/Commercial Venues.
Before coating is applied, concrete must be:
• Dry – No wet areas
• Clean – Contaminants removed
• Profiled – Surface etched
• Sound – All cracks and spalled areas repaired
Note: Mechanical preparation is the preferred method of preparing concrete for coating application. Shot-blasting, diamond grinding, scarifying and scabbling are all acceptable methods.
Voids, cracks, and imperfections will be seen in finished coating if the concrete is not patched correctly. Patch concrete with E2U Patch. After the patching material is cured, diamond grind patch. If another patching material is used, contact an E2U technical representative for a compatible and approved alternative.
All surfaces are not the same. It is recommended that a sample area be done before the start of the project. The test should be done on-site, using the proposed method by the assigned applicator to insure proper adhesion and color. A sample area should also be done on any existing coatings to determine if any contaminants exist or if delaminating will occur.
Metallic Epoxy Datasheet
Metallic Epoxy SDS - A
Metallic Epoxy SDS - B
GALLERY & TRAINING VIDEO
Toll-Free: (855) EPOXY2U(855) 376-9928
Call: (714) 477-8700
The world premium floor coating made by Epoxy2U in the USA. We operate a 25,000 square foot manufacturing facility in Fullerton, CA.